The fibre smelt quite rural, although that improved greatly after washing the finished yarn and is quite hairy, producing a fairly hairy and slightly lumpy yarn.

I spun a 3ply and got 346m from 121g (the non-round number of grams is because if you go up to Wingham, then rather than buying fibre per 100g for most of the different types of wool you select a plastic bag and stuff in as much as you would like from an enormous coil of combed top, then pay for the weight you have got. I was aiming for slightly over 100g to allow me plenty to play with), in about a DK weight.

It has come out as quite a soft and bouncy yarn, though not as soft as Merino or Bluefaced Leicester. I am enjoying experimenting with different breeds of wool and seeing how they behave. In hindsight I didn’t put quite enough twist into the singles which meant that they drifted apart a few times as I was plying. All a learning experience, I will know for next time.  The finished yarn seems fine though and not too delicate. I am looking forward to knitting with it! It is going to be part of my Handspun Leaves Waistcoat, which I must get a move on with, it has been languishing on top of my speakers recently (yes there is yarn or fibre on every surface in this house!).

I spun a 3ply, DK weight, 11 wpi, and have 146g which is 298m. Here is a (rather blury) closeup.

I had some of the uncarded merino left over, and thought it would be interesting to spin the singles in separate colours and then ply them together, and compare how this differed from the fibre that had been carded. So I spun two singles in the scarlet, and one crimson (luckily I had almost precisely twice as much scarlet as crimson), and plied them altogether in a 3ply.

Again DK weight, 11wpi, there is 53g and 116m. Here is a closeup where you can see the different coloured plies.

These are going to be part of my handspun leaves waistcoat. I am looking forward to seeing how the two different yarns knit up. The carded yarn is definitely lumpier (due to my lumpy carding), and wasn’t as nice to spin as the uncarded top. The uncarded yarn looks stripey in the yarn (although because the colours are quite similar it looks less stripey from a distance), but the colour mix is more even than in the carded yarn, and I will be interested to see whether they are a lot more similar once knitted.

I think my carding technique needs improvement but it was a lot of fun! I had two shades of red merino fibre which I blended together. Both from Fibrecrafts, the darker colour is called Crimson, and the brighter one Scarlet.

Here is a very bad picture of the two different colours, the darker on the left, the brighter on the right.

And here is one of the carded batts. I did just one pass, and put the colours in in layers so you can’t see the blended colours particularly well here.

There are a few knobbly bits where my feeding onto the carder wasn’t particularly good, and they have made the spinning a little bit lumpy (along with my general inexperience). I have started spinning the singles, and have done about half now. I am hoping to do a bit more of this over Christmas.

Hopefully you can sort of see the two colours. It is eventually going to be a 3ply, hopefully about DK weight, and become part of my handspun leaves waistcoat. I must assess the yarn I have spun so far for that, and see how I am doing.

I thoroughly tested the capacity of my bobbins while plying, and was very impressed to get 190g on one bobbin! This is about twice the amount I could get on the Ashford.

Altogether I have 303g and 741m.

I am going to go and wind it into balls now so it will be ready to knit with.

The grand plan is to make something using some of my first few bits of spinning. To give it a moderately coherent look I am going to stick to natural shades of brown and black, and some reds which I have dyed.

The modules are reversible ribbed leaf shapes which I first saw at a workshop with Horst Schulz three or four years ago. I don’t think it is in any of his books, and the notes I have taken are a bit on the sketchy side! The safety pin stuck in the brown alpaca leaf is to remind me which is the right side. Although the pattern is reversible, I wanted to be consistent with always starting a new leaf on the same side, and it was getting a bit time consuming to have to work it out each time. The waistcoat has actually looked the same since the workshop while I spin a bit more yarn to add to it. I thought I had loads of yarn when I started, but once I collected it together it wasn’t quite as much, or as much variety as I had first thought! I have just finished some black shetland and some dark brown alpaca which will go into it too. I am trying to make it a random collection of colours, not in any particular pattern, but I’m not terribly good at random.

Luckily this pattern is quite forgiving of my rather inconsistent handspun, some of them are quite a bit thicker than others, and the brown alpaca with the safety pin is very dense! I am going to try and spread out my earlier yarns among my later ones so the finished article isn’t too lopsided.